供应商 铝、铜、黄铜、青铜棒材
本产品受以下标准管制:
DIN EN 28839 (Equivalent standards: BS EN 28839, ISO 8839, NF EN 28839) NF E28839
技术数据
铝、铜、黄铜、青铜棒材
本产品受以下标准管制:
Standard DIN EN 28839
- BS EN 28839
- ISO 8839
- NF EN 28839
| DIN/ISO 8839: Brass, Aluminium, Kuprodur. Mechanical properties. | ||||||
| Material | Nominal Diameter mm | Tensile Strenght Rm N/mm2 | Stress at permanent set limit Rp 0,2 N/mm2 | Percentage elongation after fracture A5 % | ||
| Symbol | Designation | Over | To | Min. | Min. | Min. |
| CU1 | E-Cu57/Cu-ETP | - | 39 | 240 | 160 | 14 |
| CU2 | CUZn37 | - | 6 | 440 | 340 | 11 |
| CU2 | ||||||
| CU3 | ||||||
| CU3 | ||||||
| CU4 | ||||||
| CU4 | ||||||
| CU5 | ||||||
| CU6 | ||||||
| CU7 | ||||||
| AL1 | ||||||
| AL1 | ||||||
| AL2 | ||||||
| AL2 | ||||||
| AL3 | ||||||
| AL3 | ||||||
| AL4 | ||||||
| AL4 | ||||||
| AL5 | ||||||
| AL6 | ||||||
| TI1 | ||||||
| TI2 | ||||||
| Cold formed nuts are primarily made of following materials: Brass = Ms 63 = Cu Zn 37 Aluminium = AI Mg 3 Kuprodur = Cu Ni 1,5 Si | ||||||
| Machined bolts and nuts are made of following materials: Brass = Ms 58 = Cu Zn 39 Pb3 Aluminium = AI Mg Si 1 | ||||||
| Tightening torques Ma in (Nm) for screws made of: | |||||||||
| Ø | M2 | M2,5 | M3 | M3,5 | M4 | M5 | M6 | M8 | M10 |
| Brass Ms 63 Ms 63 | 0,14 | 0,29 | 0,50 | 0,79 | 1,2 | 2,2 | 3,9 | 9 | 7 |
| Aluminium AI Mg. 3 | 0,10 | 0,20 | 0,36 | 0,57 | 0,85 | 1,6 | 2,8 | 7 | 13 |
| Kuprodur Cu Ni 1,5 Si | |||||||||
| ASTM F468 F467 - Publication date: 2010 - COMPOSITION % | |||||||||||||
| Copper and Copper-base alloys; Kupfer und Kupfer-Legierungen; Rame e leghe a base di rame | |||||||||||||
| UNS Nr | alloy | general name | Al | Cu min | Fe max | Mn max | Ni max | P | Si | Zn | Pb max | Sn | As max |
| 11000 | 110 | ET copper | - | 9.9 | - | - | - | - | - | - | - | - | - |
| 26000 | |||||||||||||
| 27000 | |||||||||||||
| 46200 | |||||||||||||
| 46400 | |||||||||||||
| 51000 | |||||||||||||
| 61300 | |||||||||||||
| 61400 | |||||||||||||
| 63000 | |||||||||||||
| 64200 | |||||||||||||
| 65100 | |||||||||||||
| 65500 | |||||||||||||
| 66100 | |||||||||||||
| 67500 | |||||||||||||
| 71000 | |||||||||||||
| 71500 | |||||||||||||
| Aluminium-base alloys; Aluminium-Legierungen. Leghe di Alluminio | |||||||||||||
| UNS Nr | alloy | general name | Al | Cr | Cu | Fe max | Mn max | Si max | Ti max | Zn max | Mg | Others El. | |
| each | total | ||||||||||||
| A92024 | 2024 | Aluminium 2024 | bal. | 0.10 | 3.8-4.9 | 0.5 | 0.3-0.9 | 0.5 | 0.15 | 0.25 | 1.2-1.8 | 0.05 | 0.15 |
| A96061 | |||||||||||||
| A97075 | |||||||||||||
Standard NF E28839
规定了产品的机械性能:螺纹公称直径从 M 1.6 到 M 39(含),采用符合 ISO 261 的公...仅限注册用户的信息: 登录 | 立即注册,享受 14 天免费试用| DIN/ISO 8839: Brass, Aluminium, Kuprodur. Mechanical properties. | ||||||
| Material | Nominal Diameter mm | Tensile Strenght Rm N/mm2 | Stress at permanent set limit Rp 0,2 N/mm2 | Percentage elongation after fracture A5 % | ||
| Symbol | Designation | Over | To | Min. | Min. | Min. |
| CU1 | E-Cu57/Cu-ETP | - | 39 | 240 | 160 | 14 |
| CU2 | CUZn37 | - | 6 | 440 | 340 | 11 |
| CU2 | ||||||
| CU3 | ||||||
| CU3 | ||||||
| CU4 | ||||||
| CU4 | ||||||
| CU5 | ||||||
| CU6 | ||||||
| CU7 | ||||||
| AL1 | ||||||
| AL1 | ||||||
| AL2 | ||||||
| AL2 | ||||||
| AL3 | ||||||
| AL3 | ||||||
| AL4 | ||||||
| AL4 | ||||||
| AL5 | ||||||
| AL6 | ||||||
| TI1 | ||||||
| TI2 | ||||||
| Cold formed nuts are primarily made of following materials: Brass = Ms 63 = Cu Zn 37 Aluminium = AI Mg 3 Kuprodur = Cu Ni 1,5 Si | ||||||
| Machined bolts and nuts are made of following materials: Brass = Ms 58 = Cu Zn 39 Pb3 Aluminium = AI Mg Si 1 | ||||||
| Tightening torques Ma in (Nm) for screws made of: | |||||||||
| Ø | M2 | M2,5 | M3 | M3,5 | M4 | M5 | M6 | M8 | M10 |
| Brass Ms 63 Ms 63 | 0,14 | 0,29 | 0,50 | 0,79 | 1,2 | 2,2 | 3,9 | 9 | 7 |
| Aluminium AI Mg. 3 | 0,10 | 0,20 | 0,36 | 0,57 | 0,85 | 1,6 | 2,8 | 7 | 13 |
| Kuprodur Cu Ni 1,5 Si | |||||||||
| ASTM F468 F467 - Publication date: 2010 - COMPOSITION % | |||||||||||||
| Copper and Copper-base alloys; Kupfer und Kupfer-Legierungen; Rame e leghe a base di rame | |||||||||||||
| UNS Nr | alloy | general name | Al | Cu min | Fe max | Mn max | Ni max | P | Si | Zn | Pb max | Sn | As max |
| 11000 | 110 | ET copper | - | 9.9 | - | - | - | - | - | - | - | - | - |
| 26000 | |||||||||||||
| 27000 | |||||||||||||
| 46200 | |||||||||||||
| 46400 | |||||||||||||
| 51000 | |||||||||||||
| 61300 | |||||||||||||
| 61400 | |||||||||||||
| 63000 | |||||||||||||
| 64200 | |||||||||||||
| 65100 | |||||||||||||
| 65500 | |||||||||||||
| 66100 | |||||||||||||
| 67500 | |||||||||||||
| 71000 | |||||||||||||
| 71500 | |||||||||||||
| Aluminium-base alloys; Aluminium-Legierungen. Leghe di Alluminio | |||||||||||||
| UNS Nr | alloy | general name | Al | Cr | Cu | Fe max | Mn max | Si max | Ti max | Zn max | Mg | Others El. | |
| each | total | ||||||||||||
| A92024 | 2024 | Aluminium 2024 | bal. | 0.10 | 3.8-4.9 | 0.5 | 0.3-0.9 | 0.5 | 0.15 | 0.25 | 1.2-1.8 | 0.05 | 0.15 |
| A96061 | |||||||||||||
| A97075 | |||||||||||||
详细资料
铝、铜、黄铜、青铜棒材
|
DIN/ISO 8839:黄铜、铝、Kuprodur。机械性能。 |
||||||
|
材料 |
公称直径 (mm) |
拉伸强度 Rm N/mm2 |
永久变形极限应力 Rp 0.2 N/mm2 |
断裂伸长率 A5 % |
||
| 符号 |
名称 |
超过 | 至 |
最小 |
最小 |
最小 |
|
CU1 |
E-Cu57/Cu-ETP |
- | 39 | 240 | 160 | 14 |
| CU2 | CUZn37 | - | 6 | 440 | 340 | 11 |
| CU2 | CUZn37 | 6 | 39 | 370 | 250 | 19 |
| CU3 | CuZn39Pb3 | - | 6 | 440 | 340 | 11 |
| CU3 | CuZn39Pb3 | 6 | 39 | 370 | 250 | 19 |
| CU4 | CuSn6 | - | 12 | 470 | 340 | 22 |
| CU4 | CuSn6 | 12 | 39 | 400 | 200 | 33 |
| CU5 |
CuNi1,5 Si |
- | 39 | 590 | 540 | 12 |
| CU6 | CuZn40MnPb | 6 | 39 | 440 | 180 | 18 |
| CU7 | CuAI10Ni5Fe4 | 12 | 39 | 640 | 270 | 15 |
| AL1 | AIMg3 | - | 10 | 270 | 230 | 3 |
| AL1 | AIMg3 | 10 | 20 | 250 | 180 | 4 |
| AL2 | AIMg5 | - | 14 | 310 | 205 | 6 |
| AL2 | AIMg5 | 14 | 36 | 280 | 200 | 6 |
| AL3 | AISi1MgMn | - | 6 | 320 | 250 | 7 |
| AL3 | AISi1MgMn | 6 | 39 | 310 | 260 | 10 |
| AL4 | AICuMgSi | - | 10 | 420 | 290 | 6 |
| AL4 | AICuMgSi | 10 | 39 | 380 | 260 | 10 |
| AL5 | AIZnMgCu0.5 | - | 39 | 460 | 380 | 7 |
| AL6 | AIZn5,5MgCu | - | 39 | 510 | 440 | 7 |
| TI1 | TI 99.8 | - | 20 | 290 | 180 | 30 |
| TI2 | TiAI6V4 | - | 39 | 890 | 820 | 10 |
| 冷成型螺母主要由以下材料制成: 黄铜 = Ms 63 = Cu Zn 37 铝 = AI Mg 3 Kuprodur = Cu Ni 1.5 Si |
||||||
| 机加工螺栓和螺母由以下材料制成: 黄铜 = Ms 58 = Cu Zn 39 Pb3 铝 = AI Mg Si 1 |
||||||
| 以下材质螺钉的拧紧扭矩 Ma(单位:牛米): | |||||||||
| Ø | M2 | M2,5 | M3 | M3,5 | M4 | M5 | M6 | M8 | M10 |
|
黄铜 女士 63 女士 63 |
0.14 | 0.29 | 0.50 | 0.79 | 1.2 | 2.2 | 3.9 | 9 | 7 |
|
铝 铝镁合金3 |
0.10 | 0.20 | 0.36 | 0.57 | 0.85 | 1.6 | 2.8 | 7 | 13 |
|
Kuprodur Cu Ni 1.5 Si |
- | - | - | - | 2,3 | 4,7 | 8 | 19,5 | 38 |
|
ASTM F468 F467 - 发布日期:2010 -成分 % |
|||||||||||||
|
铜及铜基合金;Kupfer 和 Kupfer-Legierungen;框架和底座 |
|||||||||||||
|
联合国编号 |
合金 | 通用名称 | 铝 | 铜 | Fe 最高含量 | Mn 最高含量 | Ni 最高含量 | P | Si | Zn | Pb 最高含量 | 锡 | 最大 |
| 11000 | 110 | ET 铜 | - | 9.9 | - | - | - | - | - | - | - | - | |
| 26000 | 260 | 黄铜 | - | 68.5-71.5 | 0.05 | - | - | - | - | bal. | 0.07 | - | - |
| 27000 | 270 | 黄铜 | - | 63-68.5 | 0.07 | - | - | - | - | bal. | 0.1 | - | - |
| 46200 | 462 | 海军黄铜 | - | 62-65 | 0.10 | - | - | - | bal. | 0.2 | 0.5-1 | - | |
| 46400 | 464 | 海军蓝黄铜 | - | 59-62 | 0.10 | - | - | - | bal. | 0.2 | 0.5-1 | - | |
| 51000 | 510 | 磷青铜 | - | bal. | 0.10 | - | - | 0.03-0.35 | - | 0.3 | 0.05 | 4.2-5.8 | - |
| 61300 | 613 | 铝青铜 | 6-7.5 | - | 2-3 | 0.1 | 0.15 | 0.015 | 0.1 | 0.05 | 0.1 | 0.2-0.5 | - |
| 61400 | 614 | 铝青铜 | 6-8 | 88 | 1.5-3.5 | 1 | - | - | - | - | - | - | - |
| 63000 | 630 | 铝青铜 | 9-11 | 78 | 2-4 | 1.5 | 4-5.5 | - | 0.25 | - | - | 0.2 | - |
| 64200 | 642 | 铝硅青铜 | 6.3-7.6 | 88.65 | 0.3 | 0.1 | 0.25 | - | 1.5-2.2 | 0.5 | 0.05 | 0.2 | 0.15 |
| 65100 | 651 | 硅青铜 | - | 96 | 0.8 | 0.7 | - | - | 0.8-2 | 1.5 | 0.05 | - | - |
| 65500 | 655 | 硅青铜 | - | 94.8 | 0.8 | 1.5 | 0.6 | - | 2.8-3.8 | 1.5 | 0.05 | - | - |
| 66100 | 661 | 硅青铜 | 0.25 | 94 | 0.25 | 1.5 | - | - | 2.8-3.5 | 1.5 | 0.2-0.8 | - | - |
| 67500 | 675 | 锰青铜 | - | 57-60 | 0.8-2 | 0.05-0.5 | - | - | - | bal. | 0.2 | 0.5-1.5 | - |
| 71000 | 710 | 白铜 | - | 74 | 0.6 | 1 | 19-23 | - | - | 1 | 0.05 | - | - |
| 71500 | 715 | 白铜 | - | 65 | 0.4-0.7 | 1 | 29-33 | - | - | 1 | 0.05 | - | - |
|
铝基合金;铝加工。铝板 |
|||||||||||||
|
联合国编号 |
合金 | 通用名称 | 铝 | 铬 | 铜 | 铁含量上限 | 锰含量上限 | 硅含量上限 | 钛含量上限 | Zn 最大值 | Mg | 其他 El. | |
| 每个 | 总计 | ||||||||||||
| A92024 | 2024 | 铝 2024 | bal. | 0.10 | 3.8-4.9 | 0.5 | 0.3-0.9 | 0.5 | 0.15 | 0.25 | 1.2-1.8 | 0.05 | 0.15 |
| A96061 | 6061 | 6061 铝 | bal. | 0.04-0.35 | 0.15-0.40 | 0.7 | 0.15 | 0.40-0.8 | 0.15 | 0.25 | 0.8-1.2 | 0.05 | 0.15 |
| A97075 | 7075 | 7075 铝 | bal. | 0.18-0.35 | 1.2-2 | 0.5 | 0.30 | 0.40 | 0.20 | 5.1-6.1 | 2.1-2.9 | 0.05 | 0.15 |
供应商完整列表 铝、铜、黄铜、青铜棒材
Manufacturer of wire rods, bars and profiles made of aluminium and aluminium alloys
Manufacturer of cold drawn bars, strips and wires in carbon steel, stainless steel, alloy steel, free cutting steel, titanium and aluminium.
Manufacturer of sheet metal, paltes, non-ferrous metal rods and stainless steel rods
Manufacturer of stainless steel, duplex and super alloys: tubes, pipes, plates, sheets, coils, strips, bars and rods
Leader distributor of steel and non ferrous metals: bars in stainless steel, construction steel, aluminium, bronze, copper and nylon
Distributor and exporter of screws, nuts and washers and high tensile fasteners. Distributor of raw material in Stainless steel and Duplex.
Distributor of rods, profiles, sheets, plates, pipes in aluminium, in stainless steel, copper and copper alloys
Importer and exporter of sheet, plates, coils, pipes, rods, wire in stainless steel, alloy steel, carbon steel and non ferrous metal
Distributor of rods, sheets, pipes and strips in steel, stainless steel, aluminium and brass
Distributor of bars in bronze, brass and copper and sheet metal in bronze, aluminium and copper
Manufacturer of semi-finished products (round bars, rectangles, tubes, rings, half-moon and special shapes) in bronze, aluminum bronze and high tensile brass
Distributor of bars, wire, sheet, plates and fasteners in stainless steel, titanium, Monel and non-ferrous materials
Founded in 1998, thanks to its expertise in non-ferrous metal technology, the company came to be known as an industry leader in the field of copper alloy brass components and fasteners, screws, nuts and bolts
Manufacturer, supplier, importer and stockist of flanges, fasteners and roundbars in various materials like copper, stainless steel, special materials like nickel alloys, Duplex and Super Duplex, Titanium, Tantalum, Inconel, Monel, Hastelloy etc.
Stockist of fasteners and raw material (Sheet, Plate, Flat Bar, Pipe, Tube, Bar, Rod, Wire) in superalloys: Nickel, Monel, Nimoni, Titanium, Duplex etc.
Manufacturer of hot and cold rolled carbon steel, stainless steel and metallic coated steel, aluminum, copper and special alloys
Manufacturer and distributor of stainless steel: bars, coils, strips, wire, profiles, pipes
Distributor of raw material in brass, copper and bronze
Distributor of bars, tubes, wire rods, pipes in aluminium, steel, stainless steel, etc..